Stoltz bow roller

[ifishinxs]

As most know the stock black roller doesn’t hold up to well. Has anyone replaced the OE roller with the Stoltz.
If so what model did you use and is it working out.
I haven’t measured the bracket yet but Looks like the ULT-336 is the right one but may be the ULT-4 depending on bracket width.

[ifishinxs]

Okay! For those that thought about it and for those that wanted to know. Here ya go!


15CB1F1B-4B97-4D54-85D7-7EE0933D3FF8.jpegD7AAD21F-1C43-47F7-937B-02EE710A3071.jpeg

[BoatNoobie]

But which one did you get? Lol

The fit doesn't look perfect though. The bells seem too big? Just going by the distortion I see. The flat middle doesn't seem wide enough so edge looks like pressing right against the weld.

[ifishinxs]

Ult-336.
If you look at you stock roller you will see it dosen’t fit perfect either as its just a slight V. The contact area is the same on each center roller.
The bells help center the bow when loading and are designed to bend. Stoltz also has a model with smaller more rounded bells. Unfortunately no one makes a roller that fits the vexus AVX bow perfectly. The stoltz is definitely a step up from the stock roller.

[MarkG52]

[Swerve-n-Protect]

Yep, replaced mine too..... forgot the model number, got it from DrewCraft.com... he's a sponsor on here....
IMG-3411.jpg