Results 1 to 3 of 3
  1. 07-17-2021, 11:04 AM #1
    Mike A
    Mike A is offline
    Member
    Join Date
    Mar 2011
    Location
    Oklahoma City
    Posts
    2,028

    Help! Trim up just went out.

    Hit the water this morning and the first couple ribs were great. Went to make another move and the up trim is dead. Down is still hot. Made a long slow run back to the ramp and got it on the trailer and with the jack plate all the way up have about 6” of ground clearance. Gonna be a slow drive home but hoping someone can give me a hint on where to start the hunt when I arrive back at the house here in a couple hours. Like I said, diem is still hot and woulda figured if one went both would. Wrong in that one! Thanks!
    2014 Ranger Z520C, Yamaha 250 SHO
    Reply With Quote Reply With Quote
  2. Mike A
    Mike A is offline
    Member
    Join Date
    Mar 2011
    Location
    Oklahoma City
    Posts
    2,028
    #2 07-17-2021, 11:35 AM
    More accurately, the tilt up is what’s misbehaving.
    2014 Ranger Z520C, Yamaha 250 SHO
    Reply With Quote Reply With Quote
  3. wcs69rat
    wcs69rat is offline
    Member
    Join Date
    Apr 2018
    Location
    Georgia
    Posts
    131
    #3 07-17-2021, 11:13 PM
    Probably the tilt / trim relay. I had the same issue on my OX66. If it's the relay, I would recommend going back with an OEM relay. I tried the cheap route and had two aftermarket ones last about two outings each. Went back with an OEM relay and it's been good since then.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »