MegaLive question

[Livingstonkid]

If I have a Helix 9 Chirp Mega Di G3N that I use for my Mega 360 and a Helix 9 Chirp GPS (Only) G3N on the bow will I be able to attach the MegaLive to the Ethernet box and use the Helix 9 Chirp GPS (only) G3N for the MegaLive image and leave the Helix 9 Chirp Meg DI G3N for Mega 360?

[andrewo1024]

As far as I can tell, it says that your unit must be a g3n or g4n WITH DI+ or SI+

[andrewo1024]

I don’t see why you couldn’t use a splitter and use the DI g3n for all of it and just share the screen with the GPS only bird. Maybe somebody with more knowledge will chime in.

[Wayne P.]

I don’t see why you couldn’t use a splitter and use the DI g3n for all of it and just share the screen with the GPS only bird. Maybe somebody with more knowledge will chime in.

In case you missed it, the MEGA LIVE is an Ethernet accessory. The only "splitter" for Ethernet is the AS ETH 5PXG Ethernet Switch.

Read paragraph 5 and 6 in the Features section:

MEGA Live Imaging | Humminbird (johnsonoutdoors.com)

Paragraph 5 in the "leaked" information in November states the same:

[Livingstonkid]

Wayne

So will my scenario work mentioned in the first paragraph or will I need to buy another Mega Down Imaging to support the stand alone MegaLive?

[Wayne P.]

Wayne

So will my scenario work mentioned in the first paragraph or will I need to buy another Mega Down Imaging to support the stand alone MegaLive?

The information so far does not mention any Helix units that are not G3N or G4N MEGA Imaging. A CHIRP unit is not MEGA Imaging.