Lowrance gurus,
Is this possible? What are the details?
Lowrance gurus,
Is this possible? What are the details?
David
2014 Ranger Z521C
Fishing Lanier, Hartwell, Tennessee River & Coosa River
What unit? Yes for Carbon and Live, no for anything else. Also will have to switch transducers manually between 3 in 1 and in-hull. Better to get a 2 in 1 but if you don't mind manually switching, it will work.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
I have the HDS live that will be hooked up to the 3 in 1.
That’s the detail I need, how do you switch between the two? Ideally, I’d like to run it like I run my lss-2. Can I set it to have the side and down from 3 in 1 and the 2D from the thru hull ducer like it is now?
David
2014 Ranger Z521C
Fishing Lanier, Hartwell, Tennessee River & Coosa River
Many of us have a Shoot Through the Hull 2D Sonar transducer for reliable readings at high speed. Switching transducers is fast and easy and I do it all the time. Here are two videos that might have some info worth considering:
ciao,
Marc
I use the 2d thru-hull on Channel 1 and an Active Imaging 3-n-1 on Channel 2. Channel 1 is primarily for depth while running and Channel 2 is for sonar, down and side imaging. Make sure you turn "Multi-source" on in the Sonar setup. In the overlay data you can choose Channel 1 2D for depth.
George Brock
2015 920 Pro/XP
2015 Mercury 250 Pro/XS
Twin 8' Powerpole Blades
David
2014 Ranger Z521C
Fishing Lanier, Hartwell, Tennessee River & Coosa River
Not yet. I have asked Lowrance to see if this can be done; maybe a future software update will allow this.
ciao,
Marc
David
2014 Ranger Z521C
Fishing Lanier, Hartwell, Tennessee River & Coosa River