Results 1 to 7 of 7
  1. #1
    Member mrlawler1's Avatar
    Join Date
    Mar 2010
    Location
    Center Star, Alabama
    Posts
    18,536

    2015 Skeeter zx250 EZ Loader...

    Bent the shaft in the axle a couple weeks ago and I am having a terrible time trying to find a replacement..started with UFP and Dexter and got little to no help even with the serial number off the axle..been thru several truck and trailer stores and Marine stores including the dealer...has anyone replaced a drop down torsion axle on an ezloader trailer?? If so, who, what, where and when cause I'm getting nothing... thanks...
    MattandAmber Lawler on Facebook
    Matt Lawler HF on Facebook
    matt_lawler_hf on Instagram

    "There ain't a price on stupid. Stupid comes for free."

    Jonathan Hillstrand


  2. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,354
    #2
    I always call trailer manufacturer when I run into issues like that....
    Ron Fears
    Stroker/300XS
    1E003823

  3. Member
    Join Date
    Mar 2014
    Location
    Waverly, Iowa
    Posts
    236
    #3
    Yeah call Ez Loader. They will run the VIN on your trailer and send the exact axle it came with new. I did that exact thing this past off season. Easy to work with, there was like a 2 month lead time on it was the only downside but it didn't matter for me since we are iced over for 4ish months anyways.

  4. Member MichAngler's Avatar
    Join Date
    Dec 2005
    Location
    Royal Oak, MI
    Posts
    6,083
    #4
    I replaced one on my 06

    it isn't that hard

    The hard part is if it is the one with the breaks then you need to replace all the break lines splitter and holders

    I got mine from Dexter but that was a few years ago and I hear people are having a hard time with them now

    Note: count the teeth on the spline from 12 o-clock to the split in the arm so you have a starting point
    you can adjust them a tooth or two if you need clearance later
    "The handicapped angler"

  5. Member
    Join Date
    Dec 2018
    Location
    Kelseyville Ca
    Posts
    5,465
    #5
    EZ loader is twice the price of other places.
    I use Pacific Trailers

  6. Member mrlawler1's Avatar
    Join Date
    Mar 2010
    Location
    Center Star, Alabama
    Posts
    18,536
    #6
    I found the axle from the Skeeter page the bookface finally so I have a starting point.. Got my measurements on the axle itself... bracket to bracket, bracket height.. May call this pacific and try them out...
    MattandAmber Lawler on Facebook
    Matt Lawler HF on Facebook
    matt_lawler_hf on Instagram

    "There ain't a price on stupid. Stupid comes for free."

    Jonathan Hillstrand


  7. Member mrlawler1's Avatar
    Join Date
    Mar 2010
    Location
    Center Star, Alabama
    Posts
    18,536
    #7
    Called pacific and they'd have to order from the same place I'd order it from...so back to ez-loader it is...I got the part number at least and could order it from the website but would really like to talk someone about it to be sure...
    MattandAmber Lawler on Facebook
    Matt Lawler HF on Facebook
    matt_lawler_hf on Instagram

    "There ain't a price on stupid. Stupid comes for free."

    Jonathan Hillstrand