Results 1 to 8 of 8
  1. #1
    Member 86 inches's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    3,940

    Disc brake question

    I'm am changing out some bearings and when I removed the DB35 caliper, I noticed the inner pad is loose. Is there something that holds the pad in place or does it just sit back in the caliper.

    1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419


  2. Member
    Join Date
    Aug 2016
    Location
    Cal
    Posts
    1,288
    #2
    The pad should have clips on the back of the pad to hold it in place.

  3. Member 86 inches's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    3,940
    #3
    Are you sure the DB35 has clips on the pads. I don't see them on any of the other pads.

    They have these but they are part of caliper. Is this what you are talking about.

    1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419


  4. Member 86 inches's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    3,940
    #4
    I called and talked to a tech at Shadow Trailers. No clip. The pads are held in by the rotor.
    1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419


  5. Member
    Join Date
    Aug 2016
    Location
    Cal
    Posts
    1,288
    #5
    Wow! I thought they had the clips! My bad!

  6. Member 86 inches's Avatar
    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    3,940
    #6
    No problem.
    1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419


  7. Member
    Join Date
    Aug 2016
    Location
    Cal
    Posts
    1,288
    #7

  8. Member
    Join Date
    Feb 2007
    Location
    Waterloo Iowa
    Posts
    3,770
    #8
    I wasn’t sure what you meant by clips. But I understand now. There are no clips that hold them on to the caliper.