Results 1 to 12 of 12
  1. #1
    Member
    Join Date
    Apr 2017
    Location
    Elizabeth, Colorado
    Posts
    263

    Where's the fuse panel?!?!

    I lost power to my graphs. I figure its probably just a fuse and I heard there's a fuse panel in the starboard rod locker. I'll be damned if I can find it.
    I tried to remove the panel in the back of the box but that's not coming out. Is there screws hidden in the carpet for that panel or what's the deal?

    Almost forgot..... 2015 920
    Jeff
    2015 Phoenix 920 Pro XP
    250 Mercury Optimax Pro XS
    Colorado

  2. New Grandad Phoenixed's Avatar
    Join Date
    Jun 2004
    Location
    Huntsville, AL
    Posts
    708
    #2
    Yes, there are screws hidden in the carpet. It has been a while since I removed mine, so I don’t remember exactly how many screws there are.

    Hopefully, someone else should be along soon to answer that.
    Phoenixed
    2014 Phoenix 921 Pro XP
    Mercury 250 Pro XS
    Humminbird Helix 12 Chirp Mega SI
    Humminbird Helix 12 Chirp Mega DI

  3. Member
    Join Date
    Apr 2017
    Location
    Elizabeth, Colorado
    Posts
    263
    #3
    Thank you.
    Jeff
    2015 Phoenix 920 Pro XP
    250 Mercury Optimax Pro XS
    Colorado

  4. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,096
    #4
    My 619 has 2 screws about in the middle of the panel.......just fill around with your fingers, also i used a black sharpie marker to make 2 dots where the screws go so next time they are easy to find.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  5. Member
    Join Date
    Oct 2016
    Location
    Tomah Wisconsin
    Posts
    4,001
    #5
    Normally that fuse panel is mounted to the plate you are trying to take out so there is easy access to fuses.
    Fish have fins, they swim

  6. Member
    Join Date
    Apr 2017
    Location
    Elizabeth, Colorado
    Posts
    263
    #6
    Here's a pic of where I found the screws in case anyone else ever needs in there. I just took a quick look but unfortunately, I didn't find a fuse panel back there. Going to have to dig a little deeper.

    panel.jpg
    Jeff
    2015 Phoenix 920 Pro XP
    250 Mercury Optimax Pro XS
    Colorado

  7. Member
    Join Date
    Feb 2007
    Location
    Tomball, Texas
    Posts
    5,038
    #7
    Do you have a fuse at the battery? My 819 feeds from the back and has inline fuses back there.

    I had a 721 for 7 years, not sure there was a fuse panel, a lot depends on who installed the graphs.

    Good luck.
    2021 Phoenix 819 - Mercury 200 Pro XS - Ser No 2B779353
    Ultrex/Humminbird Helix 12 SI Mega/Helix 10 Mega DI/Mega 360
    Garmin 1022 with LVS34

  8. Member
    Join Date
    Oct 2016
    Location
    Tomah Wisconsin
    Posts
    4,001
    #8
    Do the graphs have inline fuses on the power wires? Maybe pull the dash shroud and check there?
    Fish have fins, they swim

  9. Member
    Join Date
    Jul 2008
    Location
    Bridge City
    Posts
    403
    #9
    Check your grounding bus bar also. Follow one of your negative leads from your cranking battery and you should be able to find it. Mine had rattled loose on the bus bar and caused me to lose power to my graphs.

  10. Member
    Join Date
    Jul 2004
    Location
    Summer Shade, KY.
    Posts
    8,270
    #10
    On my 2011 721 fuses are at the battery or pull the Dash panel, or switch panel. Like mentioned depends on who did the install or Call Phoenix they will tell you. If it's you're bow unit more than likely it is under the bow shroud

    2011-721ProXp/250SHO

  11. Member
    Join Date
    Apr 2017
    Location
    Elizabeth, Colorado
    Posts
    263
    #11
    Thanks for the tips everyone. Back at work for a few days but will check all that when I get home. If no luck a call to Phoenix will be my next step.
    Jeff
    2015 Phoenix 920 Pro XP
    250 Mercury Optimax Pro XS
    Colorado

  12. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,838
    #12
    most 2015s did not have the integrated wiring and will not have a fuse box, only the breaker panel under the console, inline fuses for graphs, and some fuses at the battery
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com