Odd situation happening that I can't figure out. Helix 12 Gen 1 at bow linked via ethernet box to Helix 9 SI Gen 1 at console. Also have Ultrex Link and 360 on this network.
Helix 12 works fine with no issues as does the 360 and Ultrex. My issue is the Helix 9 at the console does not want to show anything other than the map screen when I lift the Ultrex out of the water. It is connected to a compact SI transducer and shows connected but even with sonar on it will not show the sonar screens. It does read depth and temp however. If I turn off the ethernet box and restart the Helix 9 it will work normally.
I have the connected trandsucer chosen for 2D, DI and SI as well as temp. Kind of at a loss as I have tried everything I can think of.