Results 1 to 7 of 7
  1. #1
    Member Extremeboating's Avatar
    Join Date
    May 2021
    Location
    Concord, CA
    Posts
    490

    Bass Tracker Classic XL/ Heritage/ Pro 170 Wiring diagrams anyone?

    I have found a SCARCE amount of information regarding wiring diagrams for these boats but very recently I was able to acquire wiring diagrams of the front deck, center console, and rear of the primary boat electronics, and I noticed that at least on this board, to my knowledge, no one has them. Would anyone be interested in having them if I threw them up?
    - 2020 Bass Tracker Classic XL - SOLD
    - 2024 Lowe Stinger 178
    Mercury 115HP ProXS CT
    Vance 6" hydraulic jack plate
    24P 3 blade Ballistic XHS XL propeller
    NGK Ruthenium plugs
    Garmin Force troller
    Garmin 126SV/93SV/73SV Livescope/ dual GT54 transducers
    DD26 motor toter
    IG: extremeboating



  2. #2
    I'd love to see them. Trying to find anything under the console is impossible given the short wires and tiny access hole.

  3. Member Extremeboating's Avatar
    Join Date
    May 2021
    Location
    Concord, CA
    Posts
    490
    #3
    No problem. Coming your way.
    Attached Files Attached Files
    - 2020 Bass Tracker Classic XL - SOLD
    - 2024 Lowe Stinger 178
    Mercury 115HP ProXS CT
    Vance 6" hydraulic jack plate
    24P 3 blade Ballistic XHS XL propeller
    NGK Ruthenium plugs
    Garmin Force troller
    Garmin 126SV/93SV/73SV Livescope/ dual GT54 transducers
    DD26 motor toter
    IG: extremeboating



  4. #4
    Awesome, thanks! I was hoping to see where the horn plugs in, as it easily comes unplugged, but I don't see it marked on either of the panel diagrams. I'm sure this will still help find the right wires.

  5. Member Extremeboating's Avatar
    Join Date
    May 2021
    Location
    Concord, CA
    Posts
    490
    #5
    Quote Originally Posted by @Reel_Chris View Post
    Awesome, thanks! I was hoping to see where the horn plugs in, as it easily comes unplugged, but I don't see it marked on either of the panel diagrams. I'm sure this will still help find the right wires.
    The horn appears to be a white wire which runs from the ignition to a deutsch 6 way connector then finally the horn itself.
    - 2020 Bass Tracker Classic XL - SOLD
    - 2024 Lowe Stinger 178
    Mercury 115HP ProXS CT
    Vance 6" hydraulic jack plate
    24P 3 blade Ballistic XHS XL propeller
    NGK Ruthenium plugs
    Garmin Force troller
    Garmin 126SV/93SV/73SV Livescope/ dual GT54 transducers
    DD26 motor toter
    IG: extremeboating



  6. #6
    Not really relevant to the original topic, but the horn is indeed fed by a white wire from the 6 way, and another white wire from the fuse. One of the wires is about 4" long and can easily get pulled off the fuse if your hands are blindly reaching under the console. It's easy to put it back together if you take the horn sub panel off the console.
    Last edited by @Reel_Chris; 06-12-2021 at 08:13 PM.

  7. Member Extremeboating's Avatar
    Join Date
    May 2021
    Location
    Concord, CA
    Posts
    490
    #7
    Unfortunately the wiring below the console is somewhat of a rats nest on these boats and you can make a mess of things in short order if you are reaching in there just tugging on things. So if you do things by that method (which I have) it requires finesse to an extent. Lol.

    By the way, a lot of the connections on the dash, bilge, livewell, cig lighter 12v receptacle and those sort of things are all tied in together and if I remember right, they all have one single power feed wire supplying them voltage. So heads up.
    - 2020 Bass Tracker Classic XL - SOLD
    - 2024 Lowe Stinger 178
    Mercury 115HP ProXS CT
    Vance 6" hydraulic jack plate
    24P 3 blade Ballistic XHS XL propeller
    NGK Ruthenium plugs
    Garmin Force troller
    Garmin 126SV/93SV/73SV Livescope/ dual GT54 transducers
    DD26 motor toter
    IG: extremeboating