You can change contour mode in the standard 360 but I can’t do it on my mega ? What gives . Thanks for any help!!
You can change contour mode in the standard 360 but I can’t do it on my mega ? What gives . Thanks for any help!!
?anyone
Link to MEGA 360/Helix manual:https://humminbird.johnsonoutdoors.c...RoC2BoQAvD_BwE Page 31
Last edited by bobcoy; 05-12-2021 at 12:24 PM.
Tell me where has a slow movin' once quick draw outlaw got to go
Ya thanks but that’s for the regular 360z
mine is not allowing me toggle It off .
Why do the instructions say turning the contour mode on will show the true horizontal distance ? thought that wasn’t possible ?
The manual section shows that to be Mega 360, but the manual cover just says 360. Do you have a Helix to go along with your mega 360. I wonder why if they run differently?
Tell me where has a slow movin' once quick draw outlaw got to go
OK, this is what is happening.
With the MEGA 360 alone (default) in the Connected Transducer menu, you don't get the Contour Mode setting in the 360 Enhance menu.
If you have a HW transducer, or a DI+ transducer, or a SI+ transducer connected and change the Connected Transducer setting to add at least (HW : MEGA 360), then you get the Contour Model setting in the 360 Enhance menu.
If you run the unit in Simulator you also get the Contour Mode setting.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL