Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jan 2012
    Location
    Orange, Texas
    Posts
    76

    Boat Carpet decal ??

    I just recently removed a carpet decal and when I did, it pulled the carpet loose in a 3” x 9” area on the deck on the rod box. I’m assuming it was the way I removed it by pulling up instead of back. I removed a 2 identical decal on the other side of the rod box that came off perfect with no issues but I did remove it slower and pulled back instead of pulling straight up. Can I get some type of glue and squirt it under the carpet with a needle and syringe or something of that sort. I would appreciate any feedback. Thanks
    2017 Legend V20

  2. Member
    Join Date
    Jan 2010
    Location
    Indiana
    Posts
    7,671
    #2
    Yep, just squirt some Welwood adhesive in it. Both surfaces will dry and eventually stick to each other. Work the carpet around with your hands then sit a few bricks on it. https://www.lowes.com/pd/DAP-Weldwood-3-fl-oz-Bonding-Off-White-Multipurpose-Adhesive/3006177




  3. Member
    Join Date
    Jan 2012
    Location
    Orange, Texas
    Posts
    76
    #3
    Will it leak thru the carpet to the surface?
    2017 Legend V20