-
Member
Power Relay Switch for graph harness
Anyone set one up to power graphs and GLS 10?
I built a new harness with bluesea fuse block and marinco switch to power my graphs but I forget to turn it off at the end of the day once and a while
This is not an issue because I remove the graphs so nothing is drawing power it just leave the power leads hot
But I plan to add a Livescope system and if I leave it on the GLS 10 will continue to draw power
This got me to thinking if I use a power relay triggered off the boats main power switch as soon as I turn that off it would cut the power to all the graphs and GLS 10
Note I’m running the entire system off one Ionic 125Ah battery and is handling the load with no issues
Now I have yet to find one with larger gauge wire so maybe set it up to power the GLS 10 only
This is the type of relay I’m considering
https://www.amazon.com/Ehdis-Truck-N...0314771&sr=8-5
Any thoughts?
Last edited by MichAngler; 05-06-2021 at 10:50 AM.
"The handicapped angler"