I have a 2000 210 super pro procraft with a 225 efi, and a 12 inch jack plate. I’ve been told that I should be getting mid 60s loaded down. I can not break 58 mph. I’ve tried adjusting the jack plate and that does not seem to make a difference in speed at all. Any suggestions on how to get up into that mid 60s range?
What RPM are you turning WOT?
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
What prop and rpms? I’ve got 01 210 with 250 and run mid 70s
You should run 70ish. My 2000, 210 with a 225opti ran out at 70 with 2 guys and gear. 25 or 26 tempest depending on temps.
My 210 with a 200 does 68. I'd agree with it being a prop issue
2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
Sick motor ?
Yeah; you should be running around 70 mph. My 200 BASS ProCraft with a 225 Opti runs 68 mph fully loaded, Using a 25 Fury propeller and turning 6000 rpm. Prop center is 3.5" below pad. Hope that helps
I have a 98,20ft astro w/2011 200 proxs,just had the same problem I posted on the 3.0 merc forum and after all the help I was told to try a 14x24 fury,I borrowed my buddies that he runs on a 250,an wow what a big difference I went from not getting 50mph to 71.4 mph at 5500rpm wot. I would try either a 14x24 fury or 14x 25 tempest just like I was told
I’m running 5800 rpms.
I’m running a tempest 25 pitch prop and 5800 rpms.
Are you getting your speed from a GPS or the boat speedometer?Originally Posted by ProcraftRyan
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Reply With Quote