Good evening guys,

I am trying to tackle this retro fit kit from Skeeter.

It was all pretty seamless.. So i thought. I used an old step by step post by i believe skeeter don.

I pulled all the old harnesses, fuse box, computer, and panel.


Plug all harnesses back in, and put power to it.

All functions seem to work, except the power switch has continuous power. Any suggestions?!?!

I tried pulling the relay and power is still continuous.

I posted a picture of how i put the neg/pos wires from the harness to the fuse box. Is that correct?

Thank you for all the help.