-
Reworking/B&B question
Rookie question here
Looking at buying a prop to get reworked by Croxton. I am currently running a 25 Fury 3 pushing upper 5800's-5900rpm on a 2018 250 Pro XS (2 stroke).
Is it better to get the same pitch I am running now and get it reworked or would moving to a 26 be ok? I think bumping to a 26 will be ok rpm wise.
Can a 25 be worked to a 25.5 or does it have to be a 26 to be worked to a 25.5? I don't run the boat heavy with gear just what I need for each tournament.
Thanks for the help!
Last edited by IronAngler; 04-27-2021 at 02:59 AM.
2018 920 ProXP
-
Water temp will have a say in this also. As water temp goes up, rpms go down. To keeep that engine where it can turn 5850 wot might require a summer and winter prop.
My 2017 250 pro xs runs great through out performance range if upper rpm range is satisfied or can be achieved
i run a summer prop when water temp gets above 70 degrees