Power pole problem

[Skeeter Man]

I have a pair of PP 8’ blades, gen 1. The port side pump has a sporadic electrical issue. When I turn the main power switch on, sometimes the port side will come on and sometimes it doesn’t. When it doesn’t, after a few minutes, it will suddenly kick on by itself. All fuses are good and wiring is good. No problems with starboard pump. Any suggestions before I call PP customer service? Thanks.

[KandKKustomz]

Could be wire where enters cap has loose connection, check the internal fuse for corrosion. Swap circuit board from starboard pump to port pump and vice versa and see if problem moves now to starboard, this will indicate bad board.

[Skeeter Man]

Thanks Kevin, I’ll try that.

[KandKKustomz]

Thanks Kevin, I’ll try that.

very welcome