How do I get this nut off the shift lever. I wanna get at the trim wires..174658377_528416668564291_4049378858576673622_n.jpg174558640_285019373216559_3084377708342310023_n.jpg
How do I get this nut off the shift lever. I wanna get at the trim wires..174658377_528416668564291_4049378858576673622_n.jpg174558640_285019373216559_3084377708342310023_n.jpg
ChueFu Lee
If I remember that is a 5/8 nut. So a 5/8 socket with an extension should do it for you.
I just need to get at the trim wires for my flicker switch. Are these the trim wires? 174744474_784758589113728_5488688903581722014_n.jpg
ChueFu Lee
Yes. Red is the 12 volt supply. Blue is up green is down
thanks got my blinker switch working
ChueFu Lee
If you were simply trying to wire in a blinker-trim switch, there's no need to remove the control handle (access the harness between the control handle and the keyswitch harness).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Yeah I realize that thanks
ChueFu Lee