Originally Posted by
willwork4fish
I usually charge around $50-70 for a new seat and grips depending on what you wanted doing it from the butt end and another $10-15 for the guide. Doing it from the butt end isn't the best way because you have to use tape for arbors but it'd work fine.
The best way would be to strip all the guides, replace the seat and grip from the tip and then rewrap all of the guides. This way you can use hard foam arbors and get a better fit on both the seat and the grips. Since you have the SiC's I'd just use those. So you'd still be at $50-$70 plus $10/guide to wrap what you got. 8 guides and it'd be $130-$150.
I doubt anyone would be able to get off the Legend Xtreme seat and grip in one piece to re-use. I'm actually pretty cheap so these numbers are probably the bottom end of what you'd end up with.