Exhaust grommet

[Wisfarmer]

sn2b736768 how does the rubber exhaust grommet come off on the v8 4 stroke putting sticker on and need that grommet removed

[EuropeanAM]

Are you talking about the idle relief port at the back of the engine?

If so, it simply lips into the lower-rear cowl panel. Strongly recommend removing the port side lower cowling as this tube also connects into the Port-side muffler at the other end (and it's possible it might disengage while you're moving it around).

[Wisfarmer]

Yes the idle relief port putting a vinal wrap on it would like to remove it then reinstall after the vinal is on it

[EuropeanAM]

Might be easiest if you remove the lower cowlings and the rear/lower panel (access would be better to the tube).