I’m going to go backwards on power and curious what props are being used on a 250 Pro XS on a XRS. For those with the same combo what are you using and running?
I’m going to go backwards on power and curious what props are being used on a 250 Pro XS on a XRS. For those with the same combo what are you using and running?
Im betting a Bravo XS 28p will be a good fit, assuming you are running the new 4S.
2022 Blazer 675 Ultimate
2022 Merc 300 Pro XS
2017 YZ250F
Kenny Hollingsworth<<<<<<<<<MY NAME!
828 674 6752
Hendersonville NC<<<<MY LOCATION!!
Yea it will be a new 4S. Going from the 300R to a 250. Luckily I do have a 28.5 bravo xs as a spare on the shelf. Might be wishing I hadn’t sold my 28 Promax not long ago too.
Okay so I'm still working on seat time but my best run was on Keowee and I hit 80 at about 6K. BUT, the speed and RPM's were still climbing and she's got more than that.
Manual plate and 28P Bravo I XS.
I am going to make a change on the load balancing and put the cranking batt on the passenger side with the TM batts.
Bullet 21XRS
Mercury Pro XS 250
I run a bravo 28.5 and it runs good for me
What is a good prop to pad to start with??
Mine came from Bullet at 1/2" below pad. I raised it one click to 7/16" below pad but I lost some water pressure running at higher rpms. So I lowered it back to 1/2".
I have some block off plugs that I'd like to install on the top 2 pickup holes on each side. I just don't know if this voids the warranty???
Bullet 21XRS
Mercury Pro XS 250
I will start there--thanks