What brands have you guys used to level the trolling motor ?
What brands have you guys used to level the trolling motor ?
2016 Triton 20 TRX Patriot, 250 PRO XS
Shawn Willoughby
Home made ....
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
Ashmore Marine Products
2020 Caymas CX21 Pro
Mercury 250 Pro XS
Serial# 2B686100
Ashmore on my 2005 .
Ashmore on my 2018 19TRX
Triton 18xs w/150 Pro XS
Ultrex 80lb.
LIVE 12's
LIVE 9
POINT 1
ACTIVE TARGET
IONIC 125Ah
I ordered from Ashmore
2016 Triton 20 TRX Patriot, 250 PRO XS
Shawn Willoughby
I made my own using HPDE board, sometimes called puckboard. (High density polyethylene board) Fixing to make another one as it really needs a side to side angle too in order to really get the motor truly perpendicular on both planes.
I'm using an Ashmore also, works great. I don't have to stand at the back of the deck any longer when I'm dropping vertical. When I installed my Garmin unit and livescope, I put the wedge on, really makes a difference.
Last edited by Murph44; 04-11-2021 at 06:54 AM.
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
Ashmore Marine Products
This is what I did....
http://www.bbcboards.net/showthread.php?t=907822&page=3
Last edited by drgrammer; 04-13-2021 at 07:11 PM. Reason: Add Photo
Thanks so much for the referrals guys!! Deyhorn2 if you need any help or information please feel
free to shoot me a message
Last edited by AshmoreMarine; 02-24-2023 at 11:27 AM.
Ashmore Marine! Great products!
Is this a necessary piece of equipment?
Boatless
Seems insane that this is something you need to do after spending this much money on a new boat, it is bad enough that they made boat this way, but the fact they don't supply the wedge is also nutz
$190.00 for a 2ft piece of plastic is insane!
Pool 10
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
I have around $10 in mine.
I am probably more pleased with the 4 inch drop in motor height when stowed than I am with the true vertical deployment. It made visibility when driving better and the factory cover fit (until I added the Mega 360).
Here's the measurements of my "wedge", if it helps anyone...
Last edited by drgrammer; 04-14-2021 at 05:31 PM. Reason: Add photo