New dash plate and windshields.

[Old Stroker]

I am looking to get a new dash plate to cover holes in dash as well as new windshields. I have gotten windshields from Chubb but they break so dang easy. I was thinking carbon fiber would look good. Does anyone have a line on something like this. Trying to get this old boat fixed up.

[Stroker3.2XS]

No help on the windshields or pre-made panels, but I did make my own panels. Used .93 Lexan from Home Depot and had them hydro-dipped. Pretty easy material to work with once you get the hang of it. Word of caution, they were time consuming

[Shuck Grass]

Chris Bailey has carbon fiber windshields. He had a Facebook page with some on there.

[Stroker250xs]

I made a dash plate where the old flush mount unit was and turned it into mount for larger units. Wasn’t hard but was time consuming but well worth it

6E739265-3411-4A79-A939-7217BDE11645.jpeg

EBE5AA1A-D9D1-46F5-9056-D3ACBDCE70EF.jpeg

[Strokerdean]

CB Marine also makes dash plates and many other parts.

[John Jackson]

Does anyone make taller windshields for a Stroker?

[Wags]

CB Marine does not have Carbon Windshields anymore, he does do dash plates

[spider1]

Give Chubb a call. Chub / Alice may have a contact for the carbon fiber windshields.