I am working to set up two 10" screens on the bow of my 193. Anyone have any input for a bracket?
I am working to set up two 10" screens on the bow of my 193. Anyone have any input for a bracket?
any help out in Champion land?
Check out Beach Customs on Facebook (not the motorcycle one ) Carlton Beach he makes mounts for Champs
2009 ELITE 210
I like this set up myself! Bass Boat Technologies.
https://bassboattech.com/index.php/b...dal-bow-mounts
0f698552-dbe5-4801-937c-66289c257d19.jpg
I put both my 10" Garmin's on a dual mount from Balzout. Mounted immediately forward of the TM pedal tray.
BOAT-GRAPH.jpgMAKE YOURSELF ONE
Thanks for your help
Not a 193, but on a 203. Went with the stacked Dek-It from Procise Outdoors. Had to offset one due to where the trolling motor tray was. Trouble is now I can't step up on the bow to get to the trailer tongue to winch up. Going to have to add a step on the trailer or figure out something else. Haven't had an opportunity to use the dual setups on the water yet to get a good feel for it. But with the front of the 193 very similar to the 203, it will give you something to consider.203 graphs.jpg
CUSTOM 30" ITS ABOUT 2" TO TALL WHEN I SET DOWN HARD TO SEE TROLLER DIRECTION BUT WORKS WELL I HEAR PEOPLE COMPLAIN ABOUT LOOKING DOWN HAVING SORE KNECK MY BACK HURTS BAD ENOUGH WITH OUT THAT
I DID BRACE IT DOWN TO HULL BUT IT IS SOLID RUNS 70 DOWN LAKE WITHOUT MOVING OR SHAKING AND ONLY COST 10 BUCKS TO MAKE