Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jan 2012
    Location
    Toronto, ON
    Posts
    69

    Power poles on 02 520vx

    Just looking for some help on running of hoses and the pumps. I think I’ll mount the pumps where the spare prop should be but just wondering where guys ran the hoses into the back.... cut holes ??

    thanks

  2. Member
    Join Date
    Dec 2013
    Location
    Spring Hope,NC
    Posts
    7,256
    #2
    I put dual poles on my old 2000 vx 518 and had enough room to run the tubes out of the grommet where all the cables come out. Got a 2001 vx 520 now,the previous owner drilled holes in the front of the splash well and ran the tubes through there using bulkhead fittings.

  3. Member
    Join Date
    Mar 2016
    Location
    Murray KY
    Posts
    131
    #3
    I ran my hoses through the existing grommet where my other hoses come into the back on the boat on my 05 Z21. Plenty of room. I try to avoid drilling into my fiberglass as much as possible, but if you do go that route I feel like a step bit works best for not splintering the fiberglass.
    2005 Ranger Z21
    2005 Mercury Verado 250

  4. Member Grumpy/LGF's Avatar
    Join Date
    Dec 2015
    Location
    NorCal
    Posts
    935
    #4
    My hoses for my dual 10' blades are ran through the grommet hole with the other lines and cables.
    2001 Ranger 520DVX 225 mercury

    HHC 14TH ENGINEERS COMBAT HEAVY
    FT.ORD ,CA
    US ARMY