Is the recording for the Simulator Mode on G3N models limited to only certain frequency spectrums like the older models that were missing 83khz?
Is the recording for the Simulator Mode on G3N models limited to only certain frequency spectrums like the older models that were missing 83khz?
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
If you change the Connected Transducer setting to 83/200 kHz, then yes 83 kHz is still missing. You get the Sonar/Sonar view with 83 kHz on the left and 200 kHz on the right.
HW CHIRP is a single frequency band with choices to use the upper end or lower end, so there is no dual frequency.
There is no Sonar/Sonar view for HW CHIRP since there is not two different frequency bands.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne. BTW, I was using the default Connected Transducer setting (MSI+ model). I was just trying to see differences in settings between Full/Wide/Narrow and how they impacted the sonar view.
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow