Recommendation Sought: Adhesive/Sealant for Livewell Repair

[brimster]

Replacing a broken fitting in live well. Replacing the entire elbow that you see in the pix (as seen from the bilge side). What is the "go-to" sealant/adhesive for this sort of job? Was thinking 3M 4200. But perhaps y'all have a better idea? Thanks!!

unnamed (8).jpg

PXL_20210215_210339834.jpg

[wmitch2]

I'd not even try to repair that, I'd just replace the fitting !!! BUT, you could try Gorilla Super Glue

[brimster]

Right. That's what I'm doing. "Replacing the entire elbow that you see in the pix (as seen from the bilge side)" My question is what sealant/adhesive would I use when installing the new fitting. Thanks!

I'd not even try to repair that, I'd just replace the fitting !!! BUT, you could try Gorilla Super Glue

[brimster]

Bump...any recommendations out there in BBC Land?

[Chris85]

3m 4200 or life caulk.

[twitch]

3M 4200 should work just fine or Starbrite pure silicone

[brimster]

Thanks y'all. 4200 on order. My tube had dried-out (as always).

That's a question for you BBC gurus.... How do you use 4200 beyond a single use? Mine dries out (cures in the tube) EVERY time!