Can someone tell me approximately how much of the pole sticks up past the top cap, on the boat, have an Basscat Eyra , doesn't matter boat brand just want some info. I have a 10' garage door wanting to see if they will fit without being lowered. Thx
Can someone tell me approximately how much of the pole sticks up past the top cap, on the boat, have an Basscat Eyra , doesn't matter boat brand just want some info. I have a 10' garage door wanting to see if they will fit without being lowered. Thx
a 10 foot pole will fit thru a 10 foot garage door w plenty of room it will clear a 9 foot door on a cat.
10ft – 68in (from bottom of stern bracket to top of knuckle)
The overall retracted length of the Power-Pole Blade 10 shallow water anchor is 68".
The mounting location can change per boat, jack plate, and mounting option, so I would not be able to give you the exact overall height. To get you a good roundabout height, you can measure from a few spots; top of the jack plate, top motor bolt, and/or from the deck of the boat straight up. This will give you a good general height, along with a little wiggle room to give or take.
Please let me know if you have any questions
I have to lower my 10ft pole so i can clear the top of the door. Not a big deal to do this
when you see this on the water stop and say hi.
Thanks for everyones replies
My research I've been doing is 94 inches from the floor to the top. This would hit my ceiling so I'm doing 8s.
I have 10's and door height is 6. I use hydrilla gear tilt brackets.
Another option is to use the Talon tilt bracket, they work perfect on my Blades
Risen From The Ashes!!
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
I have 10 foot Blades on the full Talon brackets with tilt from my previous Talon install, and from what I can see when traveling they are pretty darn solid. Can't speak for other makers of tilts.
Risen From The Ashes!!