Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    Gilbert
    Posts
    76

    Garmin Force on Triton 211 sf

    I just recently purchased a triton 2007 211sf. I was wondering if anyone has put a Garmin Force on one. If so, I was wondering what shaft length you went with. I have researched it a bit and there seems to be a lot of confusion. I just wanted some first hand experience if someone has one on their 211- SF. Any advice will be greatly appreciated. Thanks in advance - Josh

  2. Member
    Join Date
    Feb 2021
    Location
    Wadesville, In
    Posts
    2
    #2
    I have a 1993 Javelin fish and ski ( our hulls are similar, yours may be
    a little deeper) and had a new Minn Kota Terrova installed.
    I had the shaft shortened to 50” and it is perfect for me.
    I had an old power drive on it before, the shaft
    was 54” and it was a little too long.
    Terrova was only offered in 45” and 60”.

  3. Member
    Join Date
    Mar 2009
    Location
    Gilbert
    Posts
    76
    #3
    Thanks so much. I have read where the 57" Garmin shaft is similar to a 50" Minn Kota.

  4. Member I.P. Freely's Avatar
    Join Date
    Sep 2017
    Location
    Lake Lanier
    Posts
    3,430
    #4
    Can’t help you, but congrats on the boat!

  5. Member
    Join Date
    Feb 2021
    Location
    Wadesville, In
    Posts
    2
    #5
    I looked at support.garmin.com and
    there is a diagram that may be helpful.
    It shows bow to waterline distance.
    0” to 19” distance 50” shaft
    15” to 26” distance 57” shaft
    Good luck.

  6. Member
    Join Date
    Mar 2009
    Location
    Gilbert
    Posts
    76
    #6
    Thank you yellowgirl. I saw that too. I am taking the boat out tomorrow to measure. I will let you know my findings