➡️➡️ 💥FREE Backing Plate w/purchase 💥 - PROTECT your trolling motor!

[ShuttleSlide Mounts]

FREE! - For a limited time, purchase a ShuttleSlide RETRACTABLE mount (7" - 12" length) and we will include a FREE short backing plate with your order. Before checkout, add a backing plate (BKP-1) to your order and then enter coupon code: freebacking2021 to receive your 3.5" x 6.5" backing plate. This short 4 hole plate can be used with our 7-12" HD mounts or 7-12" UHD mounts and it also has the 4 hole bolt pattern if you purchase the BMA-12 with your mount.



*Offers expires on 2-28-21. Must purchase a 7"-12" mount to receive this offer and also ADD a "BKP-1" to your order. This 6.5" plate will just use the first 4 through bolts closest to the rub rail.

www.shuttleslide.com/shop

short_backing_plate.jpg
3.5" x 6.5"

short_backing_plate1.jpg

shuttle_slide_970x250_ad.jpg

[ou1dadgumit]

Thank you!

[ShuttleSlide Mounts]

This offer was successful in February, so it's here again!

FREE! - Back again for a limited time, purchase a ShuttleSlide RETRACTABLE mount (7" - 11" length mount) and we will include a FREE short backing plate with your order. Before checkout, add a backing plate (BKP-1) to your order and then enter coupon code: freebacking2021 to receive your 3.5" wide short backing plate. This short 4 hole plate can be used with our 7-11" HD mounts or 7-11" UHD mounts and it also has the 4 hole bolt pattern if you purchase the BMA-12 adapter plate with your mount. The aluminum plate will be at least 6.5" in length.



*Offers expires on 5-16-21. Must purchase a 7"-11" retractable mount to receive this offer and also ADD a "BKP-1" to your order before entering the coupon code. This 1/4" thick aluminum plate will just use the first 4 through bolts closest to the rub rail. The length may vary a bit, but will not be less than 6.5" long.

www.shuttleslide.com/shop

short_backing_plate.jpg

[Fooshman]

Do yall plan on doing this again?

[ShuttleSlide Mounts]

Do yall plan on doing this again?

Yes, if you are planning on ordering, give us a call (321.345.3315) and we can add the backing plate to your order.