Hey guys, I have a bravo 1 that Croxton worked, a guy wants to trade me for a Performa 28BC, what do you guys think before I do?
Hey guys, I have a bravo 1 that Croxton worked, a guy wants to trade me for a Performa 28BC, what do you guys think before I do?
Ron Fears
Stroker/300XS
1E003823
No experience with the BC, maybe try to meet at the lake and run it
Well way too far, I have a 26 Bravo 1, 28 and 30, all have 8 PVC holes and worked by mark Croxton. I do not have a over the hub unit, I will say the 26 that mark did is a perfect fishing prop. I have a 1.62 gear case. Thought it might be a good trade for the 28, it is labbed and so is the performer 28 4BC.
Ron Fears
Stroker/300XS
1E003823
Worst case is that it runs good playing around, I can just get another Bravo 1 28 and have Mark work it also.
Ron Fears
Stroker/300XS
1E003823
Keep in mind a 28 performer 4 BC will run about the same RPMs as a 30" Bravo.
I run 30 Performer 4 blade BC on a 2005 250 XS. Hole shot is ok, top end 94.8 loaded with all my fishing tackle, 1/4 tank of gas and just me in the boat. I also have a very worked 30 Performer 3 blade. Better hole shot and same top end. My third prop is a 28 Performer 3 blade (not a BC) with some minor work. It has a better hole shot and runs 92.5.
fastglass1
2000 Stroker
2005 250XS
30+ Performer 3 and 30 Performer 4
Seems he is getting his worked first and see if it does better. All of my props are bravo 1 s
Ron Fears
Stroker/300XS
1E003823