Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2020
    Location
    Toronto Canada
    Posts
    22

    Lowrance Elite Ti2 & HDI Transducer at Bow

    My first post - Looking at getting an Elite ti2 9” or 12” and mounting at bow, and using with my existing HDI transducer on my old Motorguide TM. Anyone have a similar set up and welcome comments on quality of Downscan Imaging with the ti2 and HDI. Thanks

  2. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,673
    #2
    Should work fine, you probably need the 7 to 9 adapter as I`m guessing your HDI has the blue connector.

  3. Member
    Join Date
    Aug 2020
    Location
    Toronto Canada
    Posts
    22
    #3
    Thanks. Yup it does. It’s in my shopping cart along with the fishfinder. I wish the active 3 in 1 transducer was a little shorter, even if it was a little wider, as it sticks out too much past the nose on my old Motorguide TM. Although my contact at Lowrance said using the side imaging with a transducer mounted to a TM can be a bit of a pain given the ever changing direction of the TM.