Using Thru Hull with 3/1. Carbon units....

[Fboro]

Finally took the boat out today after changing out the LSS2 for the 3/1. I know that I’ll need to switch to the shoot thru while on plane to read depth. What the best way to go about it? Any short cuts, tips, tricks? Can I just read from the in hull all the time?

[acwd1950]

I think if i remember right you need the multi source setting turned on under sonar tab.( settings then sonar) after that is on you go to 2d sonar page then you should be able to change sources for 2d. Ch1 should be the in hull and ch2 should be 3n1. You can change the name of each channel.