Looking at bay boat, would like to apply antiskid coating to floor and deck. Any preferred brand, ones to avoid?
Looking at bay boat, would like to apply antiskid coating to floor and deck. Any preferred brand, ones to avoid?
I used roofing valley stuff. It has stayed down for several years on an aluminium deck. I don't know how it would work on the floor. It is very non-skid, but will sand skin very well!
What "Roofing Valley" stuff ???
Ranger Boats / Mercury Motors
G Loomis Rods / Shimano Reels
Raymarine / MinnKota Ultrex
Garmin / Live Scope Plus
Pepper Jigs / Robo Worms
Troll Bridge / V-T2 Vents
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Fiberglass
I would check with Spectrum...they offer some soft side rubber particles. They also have great tech support.
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
SeaDek seems to be the industry leader with Dekit starting to gain regional market share. There is also gatorstep, hydroturf and one other that i can't think of that have some DIY options. You could also buy the sheets from Amazon and do it yourself. I'm just not brave enough to do it and i'm researching the same thing for my bay/flats boat.
Kiwi grip is nice, apply with a brush and roll aplicator to create the texture
Awlgrip 2 part epoxy. Then stir in the texture of choice. Or lay down s base coat apply sand or walnut shell media over the top. Then apply a top coat.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,