Seat bushing help on 2006

[Netweid1]

I'm trying to determine the correct bushing for my 2006 188vs. It looks a little different than the 300 series boats I've had in the past. Also the one in the maintenance section is on a 300 series boat. I'm wondering if any of you can tell me which one of these is needed? I know it's not the Springfield 21-00040 kit as I got first and it's larger than the socket it should be inserted into.

https://www.cascadedepot.com/springf...r-kit-2100038/

or

https://www.cascadedepot.com/spring-...g/#description

Thanks in advance,

[jtracc]

I have a 13' z118 so basically same boat and I don't think either of those are the correct one. I replaced the one on my front deck few years back. I called ranger and they sent me the ones I required. Check out my history, I know I posted about the install with photos.

[Netweid1]

I have a 13' z118 so basically same boat and I don't think either of those are the correct one. I replaced the one on my front deck few years back. I called ranger and they sent me the ones I required. Check out my history, I know I posted about the install with photos.

I found it but didn't see any part numbers associated.
http://www.bbcboards.net/showthread....368&highlight=

[jtracc]

This is the one ranger sent me.

AB3CDF63-33A5-4D94-9660-223FEA866C92.jpeg

[Netweid1]

This is the one ranger sent me.

AB3CDF63-33A5-4D94-9660-223FEA866C92.jpeg

That's the one I had that did not work. The OD of the bushing was larger than the hole on mine.

[Olebiker]

I just got off the phone with Bobbie Jean at Ranger parts. My boat is a 2007 170VS and the part number she is sending me is 201849. I expect yours is the same.