Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Apr 2018
    Location
    CA
    Posts
    33

    Please help with 2.4 Mariner wiring

    Serial number 0a130330
    1985 175 hp 2.4 Mariner

    I am putting my engine back together and not sure where the 3 wire harness connects to on the starboard side. The harness comes front the boat. There is a white wire that is not being used, it is taped up. The other two wires are white and green and routed up between the starter and switch boxes. I took pics but couldn't make out where they go, I think one may have gone to the tilt safety switch but not sure. Any help would be greatly appreciated !


    IMG_7085.jpg
    IMG_7085.jpg.jpg

  2. Member
    Join Date
    Apr 2018
    Location
    CA
    Posts
    33
    #2
    I found the other end at the kill switch thanks to Don !

  3. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    14,036
    #3
    grnd the blck and put green on tilt kill switch or blk/yellow terminal on switch box
    .................................................. ...the scariest thing in life is the unknown ...................................

  4. Member
    Join Date
    Apr 2018
    Location
    CA
    Posts
    33
    #4
    Thanks Joe you and Don have been a huge help in the assembly of my engine.

  5. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    14,036
    #5
    .................................................. ...the scariest thing in life is the unknown ...................................