Guys I am going to be upgrading to Hummingbird electronics. I am putting a 15 at the console and 12 at the bow. Problem is the Lowrance on the front of the boat is flush mounted. Any ideas on how to fill the hole left by the flush mounted lowrance?
Guys I am going to be upgrading to Hummingbird electronics. I am putting a 15 at the console and 12 at the bow. Problem is the Lowrance on the front of the boat is flush mounted. Any ideas on how to fill the hole left by the flush mounted lowrance?
I just contacted Tim at Phoenix and bought a new shroud when I changed out my electronics at the helm and I will do the same when I change out my flush mount up front.
Bass Boat
Powered by an outboard
Electronics at helm and up front
Pulled by my truck
Mounts and plate here: https://www.precisionsonar.com/
"Everyone should believe in something; I believe I'll go fishing."
-Henry David Thoreau
Men and fish are alike. They both get into trouble when they open their mouths
author unknown
2015 Phoenix 919 225 Yamaha SHO
2014 920/SHO
If you would like more information, shoot me a call 270-703-6133!
Thanks for the recommendation everyone. We appreciate it greatly!
Just ordered a plate from Phoenix. Real easy to install. Got a dual mount for both front graphs
IMG_20201104_090144573_HDR.jpg1/4 cutting board from walmart...9.99
Last edited by 920screaming250; 01-15-2021 at 10:27 AM. Reason: spelling
TrackerUser
TrackerUser
Definitely check out Bass Boat Technologies! You won't be disappointed
2024 Phoenix 721 ProXP/ 2024 Mercury 250 ProXS 4S
Dual 8ft Power-Pole Blades
Lowrance Electronics
www.phoenixbassboats.com
www.mercurymarine.com
www.power-pole.com
www.freedommarinecenter.com
www.bassboattech.com