Trim SHO 250

[bradknight83]

So in my garage I’ll put the trim up say 1/4 of the way up, where the motor would be level let’s say. So the motor is still resting on the rams.

the problem is I’m noticing after a day or so the motor is back all the way down: what would cause this?

[1GThompson]

My 200 SHO was doing the same thing. My manual lowering screw was loose. I tightened it up and my engine stays trimmed up now.

[bradknight83]

Tightening the screw didn’t work. It seems if I am over the 2 rams it doesn’t lower , but when it’s resting on the 2 rams it will lower very very slowly. Over night it’s all the way down.