I am looking to install a Lowrance total scan transducer on the back of my 2007 LE199 and wasn't for sure where it needs to go. Can it be installed next to drain plug or is that too far tucked under the boat? Can someone post pics of theirs if they are running the total scan transducer?
Do u have a jack plate?
If so, is there a bottom plate for hole shot on the jack plate?
my transducer is mounted in the enter to the front of that jack plate bottom plate.
i have a 211r
Oh yea my on plane transducer is a through the hull.
my side scan structure scan is under jack plate
Yeah, that's the way I have mine, but his Total Scan also has his 2D, so it needs to be mounted so it will be in the water when on plane. I'd mount it on the starboard side on the step if possible.Originally Posted by capt odie
I have an Atlas hydraulic jack plate on it. I have been looking at the brackets that mount to side of jack plate.
As I stated above, I thiink you'll lose your 2D while on plane with it mounted there, but if you have a transducer in the hull you can use, you may can do that. I've got a buddy with a Total Scan and I don't recall if it has 2 connectors or just the one.
Reply With Quote