What speeds is everyone seeing with this set up? 200 Pro xs.
What speeds is everyone seeing with this set up? 200 Pro xs.
I'm sure it'll be at least 70 on top end which is what the 2S runs.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Yep, I get 71.0-71.5 GPS with just me on the 2S.Originally Posted by krindgen
Thanks guys. How is the ride and turning ability? Coming from a champion
You've got a pretty high bar with turning in a Champion. But, my 819 corners better than my ol' Ranger did especially at low speed when out idling around or just fast enough to be on plane. Ride is soft.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
I also came from a champion, 186 to be exact. Night and day better across the board with the Phoenix. And I loved that old champion..
Thanks guys. Had a 94 stratos 201 and liked that boat a lot. Then went to
champion 187 and that boat was fun and rode great. Looking at the 819.
I know there a good boat was just curious of speed and ride plus handling.
Sent you a pm. My 819 is for sale just a few miles up the road from you.
Thanks for the info guys, I put a deposit on a new one yesterday.
2021 Phoenix 819 - Mercury 200 Pro XS - Ser No 2B779353
Ultrex/Humminbird Helix 12 SI Mega/Helix 10 Mega DI/Mega 360
Garmin 1022 with LVS34
My 2020 819 4s, will run 68-69 fully tournament loaded with 2 guys. By myself with a normal load 70-71, and 1/4 tank with just enough weight for balance I have seen 73.
Follow up. I ordered one back in December it should be showing up anytime.
are you running the Fury 3blade
Last edited by Champ726; 01-23-2021 at 08:18 PM.
Anyone have a prop to pad measurement with 10" manual jackplate on a 4 stroke? Picked mine up yesterday, dang sucker is tall!
2021 Phoenix 819 - Mercury 200 Pro XS - Ser No 2B779353
Ultrex/Humminbird Helix 12 SI Mega/Helix 10 Mega DI/Mega 360
Garmin 1022 with LVS34
3” will get you pretty close
2019 Phoenix 919 Pro XP - Mercury 225 Pro XS V8
I think so to. I ran my 250 2s on the 721 around 3-1/8" to 3-1/4". I mainly want to check it to see where the factory put it. The dang motor sits pretty high right now, might just be the difference in the cowl on the 4s versus the 2s. Thanks!
2021 Phoenix 819 - Mercury 200 Pro XS - Ser No 2B779353
Ultrex/Humminbird Helix 12 SI Mega/Helix 10 Mega DI/Mega 360
Garmin 1022 with LVS34
Anyone run a hyd plate on their 819? Have a guy I know looking for advice on what size setback to get. 819 with 200 4s ProXS
Fish have fins, they swim
Yes I have a 10” Bob’s
Reply With Quote