Anybody add a step to their trailer to make getting into the boat easier? I have a V175 Targa that I’ll be launching by myself a lot. I’d rather not spend $300.00 to accomplish this.
Anybody add a step to their trailer to make getting into the boat easier? I have a V175 Targa that I’ll be launching by myself a lot. I’d rather not spend $300.00 to accomplish this.
I prefer the trailer tongue steps and IMO Tracker has the best out there. You will have to check with the parts department and they can order it.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
I know I am glad I spent the money for my trickstep. Best money I ever spent on the boat.
I have the same step on my PT190 trailer that Bill Reynolds has. Between the purchase price and shipping it's in the $300.00 range but it's worth every penny. You tracker dealer can get it, it's the same one that's used for the Nitro boats.
2018 Tracker Pro Team 190 TX
115 Mercury Pro XS 4S
I made one from three pieces of diamond tread plate.
One sandwiched between the winch and stand, one on top of the tongue and a small one under the tongue to sandwich the tongue without using U bolts. Haven't decided to add a grab bar yet, been about 5 years, but may if I get too unstable to do without.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I do like the looks of that
I added the same Tracker step as Bill Reynolds and Goldstarr on my 2017 PT190. It is great. My trailer was pre-drilled for it so the install was a breeze. The support rod is essential for me making entry and exit very safe.
Joe B
2017 Tracker PT 190 TX
2017 Mercury 115 Pro XS
Mercury Spitfire X7 19” prop
51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
4.2 second Hole Shot (measured using Vessel View Mobile)
Engine mounted in 3rd hole
Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
Humminbird Helix 12si Gen1 chirp on console
Humminbird Helix 15si Gen4 cho on bow
Humminbird Mega360
Dotline two step transom boarding ladder
Tracker trailer bow boarding step
Actually this is my setup, my steps were custom made and are no longer available. The previous pic I posted was a stock photo showing the Tracker step, which I think is just as good or better and they are commercially available.
Either way, this is one of the best additions I have made to my boat/trailer.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
dtsinnovations.com, I added my own handle.