Thread: 06 202 pro v

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2020
    Location
    Macon Georgia
    Posts
    38

    06 202 pro v

    Since re powering my 06 202 blazer with a 2018 mercury pro xs optimax 250hp I’m struggling with my set up, I was running a 225 HpDI with a 27 t1 running 76-80mph depending on load with a pretty decent hole shot. I have a 15 inch rapid jack plate. Would really like to hear some feed backs on y’all’s set ups with a 250 pro xs and what are y’all’s performance numbers? Iv ran a original 28 bravo 1, a full flair trophy 26 with added cup, and now a 27 txp 0t4. And the best speed Iv gotten was with the 28 bravo on at 76mph at 5650rpms. Would like to speak with somebody on the phone about it, so if you would not mind helping me out send me a PM with your number. Thanks guys!

  2. Member
    Join Date
    Mar 2019
    Location
    Vinton, VA
    Posts
    212
    #2
    I only have a small amount of prop knowledge but I do know those four blade props will not be as fast as that three blade T1. You are probably loosing 4 mph just from that.

  3. Member
    Join Date
    Dec 2013
    Location
    Spring Hope,NC
    Posts
    7,254
    #3
    Can you get your hands on a Tempest+ 27 or 28? I think they would perform close to your old T1. Or you could have the T1 rehubbed to fit the Mercury.

  4. Member
    Join Date
    Jun 2020
    Location
    Macon Georgia
    Posts
    38
    #4
    Trying to trade a 26 trophy with added cup to the tips for a 27 tempest now