My helix 7 is telling me when i save a trail or a waypoint that it is saved but it dosent populate on my map and it is not in my stored screen. Has anyone experienced this and is there a fix?
My helix 7 is telling me when i save a trail or a waypoint that it is saved but it dosent populate on my map and it is not in my stored screen. Has anyone experienced this and is there a fix?
2011 21xrd
2011 250 Pro XS
What is you Saved Track Defaults?
Do you have Screen Snapshot Waypoint turned on and no memory card in the unit?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I'll have to answer first 2 questions later today or tomorrow. Only card I got in it is lakemaster card. Is there a place that shows internal storage vs storage used?
2011 21xrd
2011 250 Pro XS
Is the unit software version current?
Should do waypoints OK with the Lakemaster card in the unit.
No memory usage file that I know of.
A waypoint is saved with a quick push of the MARK button.
A snapshot is saved by pushing and holding the MARK button for about 2 seconds.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
2011 21xrd
2011 250 Pro XS
Wayne, saved tracks is visible. Screen snapshot waypoint is on. Not sure of version or where to find it. It'll hold the waypoint till I power it down and when power up its not there. Trsil dissappear as soon as I save it
2011 21xrd
2011 250 Pro XS
The default Saved Tracks is a very light grey dotted line. To make it more visible, you can edit it to a solid line and another color. You can also change the Saved Tracks default to your choice and won't have to edit them unless you do a Restore Defaults and it goes back to the light grey dotted line.
The software version is displayed on the SYSTEM STATUS view. You have to change that view to Visible so it is displayed in the Views rotation.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
It is definitley the screen snapshot, mine did the exact same thing. ( Turn it OFF)
Wayne is right about the default trails being very faint. I couldn't see any until I changed the default as Wayne describes.
Joe B
2017 Tracker PT 190 TX
2017 Mercury 115 Pro XS
Mercury Spitfire X7 19” prop
51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
4.2 second Hole Shot (measured using Vessel View Mobile)
Engine mounted in 3rd hole
Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
Humminbird Helix 12si Gen1 chirp on console
Humminbird Helix 15si Gen4 cho on bow
Humminbird Mega360
Dotline two step transom boarding ladder
Tracker trailer bow boarding step
Version 1.540
2011 21xrd
2011 250 Pro XS
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
2011 21xrd
2011 250 Pro XS