Outdoor Kitchen Complete

[RazorCat]

After two months of design and layout, and another two months on construction I finally got my dream outdoor kitchen. I hired a stone mason to lay the flagstone, install the stone veneer, and a local company to cut and set the granite. I did the rest with a little help from friends here and there. It wasn’t easy, and it wasn’t cheap, but it was fun and satisfying from start to finish.
BBQTUBES frame, Hardie Hydrodefense cement board, Coronado Stone veneer, and black granite countertops. All non-combustible materials throughout. Napoleon Prestige Pro 665 grill, Summerset dual power burner and Summerset cabinets and doors. All 304 SS.
And the BGE, of course.
My next project is to build a shed roof over the whole thing next Spring.
Sorry. Pic heavy.
1EB59CA3-AFCB-4F61-BC3E-805989A0204E.jpegB9E96997-1AE5-41F4-ABFF-14ACFBD7AAC3.jpeg36F71F99-86B2-4A7B-A562-C96B80C6BE34.jpeg59752FD6-5E5D-4423-BBA8-7CEB7947E80A.jpegBFF07B6C-CD55-4647-BC12-AD14B494BCE8.jpeg8E427325-7CCD-43C5-9711-AB2835C03408.jpegCE11BB1B-2A1F-4CA8-B590-C5275201EC6A.jpeg2115B1AE-6579-4C22-B16F-AC4833E80BF1.jpeg3D721ABD-1F59-4380-82DC-235A0E8D2D98.jpeg39264E7A-1BAA-4497-8058-3F967BB75B2B.jpegD3CBC83C-1876-49DA-BBFE-907C1AEB04B4.jpeg

[brucekgreen]

[basscla]

Well done

[RazorCat]

The grill is breaking in nicely. It has a built-in smoke box and burner. Makes short work of a rack of ribs cooked at 325-350 on indirect heat.
Need to christen the Egg this weekend.
It’s been nice having all my grilling/smoking supplies in one spot.

[Cape Fear]

Nice layout and I'm sure there will many years of fun and enjoyment. Great job.

[GaryL]

Very Nice. Thanks for sharing with us. You gave me some ideas for sure.

[Axkiker]

What is the framing made of ? Aluminum ?

[OkieLure]

Good work. I did something similar, but not as large.

[JohnnyO]

Someone has talent, very nice

[MichPhoenix77]

Awesome Job!

[Tidewater Bass]

Thats some quality work. If you have any free time I'll send you an address...

[RazorCat]

What is the framing made of ? Aluminum ?

It’s a BBQTUBES frame. Galvanized 1-5/8” steel tubing and preformed fittings for corners, connections, etc. All vertical tubes, countertop tubes, and length tubes are the same length, so you only make cuts (using the tubes and fittings in the specific cut-out kit). I made 12 cuts with a cutoff blade in my circular saw to complete the 12’ module with cutouts for my grill, side burner, and Egg platform. Total cost for my kit with all hardware and screws shipped was $1280.00. You pay $9.99 for the Shopping List program, send them a simple drawing with appliance models and descriptions, and they send you a list of components you’ll need to buy. Very simple.

[mcdye]

Dang nice setup and work done!!

[tonybfishing]

Sweet setup!! Looks great!

[LikeToFish]

Very nice indeed. You can cook burgers on that Napoleon for the whole neighborhood. I have a 500 Prestige Pro and even that size has a lot of cooking real estate. Your set up for many years of enjoyment. Congrats!

[Axkiker]

It’s a BBQTUBES frame. Galvanized 1-5/8” steel tubing and preformed fittings for corners, connections, etc. All vertical tubes, countertop tubes, and length tubes are the same length, so you only make cuts (using the tubes and fittings in the specific cut-out kit). I made 12 cuts with a cutoff blade in my circular saw to complete the 12’ module with cutouts for my grill, side burner, and Egg platform. Total cost for my kit with all hardware and screws shipped was $1280.00. You pay $9.99 for the Shopping List program, send them a simple drawing with appliance models and descriptions, and they send you a list of components you’ll need to buy. Very simple.

Ohhhhh wow that is great. I could hand fab something like that but most likely not for that price and not nearly as fast. Heck of a setup

[RazorCat]

Thank you all. I’ll have to post some food pics when the weather cooperates.