I am going from a Mercury 2008 pro xs 250 2 stroke to a pro xs 4 stroke. Do I mount the new motor bracket on my Bob's jackplate in the same hole as the old. It was mounted second hole from top. Boat is Ranger Z520.
I am going from a Mercury 2008 pro xs 250 2 stroke to a pro xs 4 stroke. Do I mount the new motor bracket on my Bob's jackplate in the same hole as the old. It was mounted second hole from top. Boat is Ranger Z520.
Normally going to move up one hole on the 4-stroke.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Don, you are saying the 4s runs higher than the 2s. Right?
It will run higher than your Gen-1 TM gearcase model did. Applicable to your specific circumstances.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor