Trailer jack appears to be part of trailer

[Bassman Ia.]

Picture is worth a thousand words..
Hopefully the OP's is a swivel jack. if not my suggestion would be get one.

After having one like the one above and on extended Ranger trailers, they should all be in the center. More stable

[fishnfireman]

Glad you like them. I haven't seen one on a new boat for many years. Makes this ole man tired just thinking about having to use one again .
Last one I had was on a horse trailer -- took about three trips in the country and it got bent so bad we had to cut it off.

[Flip Flop Fisher]

can't find any snap ring trailer jacks

[CatFan]

can't find any snap ring trailer jacks

Virtually all side mount jacks are. Weld on or bolt on all mount the same way to the swivel.

[Bassmeister]

You could remove it and cut that wheel off and weld the wheel of your choice on the bottom, then clean it up good and respray with a galvanized paint or something of your choosing.....

[fishnfireman]

Mine just like his and kind of on last leg ---nice to know can just remove and replace with new one ---thanks !!!

Check board sponsor etrailer.com they have a LARGE selection if you can't find what you want local.

[fishnfireman]

can't find any snap ring trailer jacks

Where did you look ??

[Wayne P.]

can't find any snap ring trailer jacks

Side Frame Mount Jack 1200 lbs Trailer Jack | etrailer.com

[wmitch2]

Do yourself a big, BIG favor and get a Fulton F-2 duel wheel jack !!! SO much easier to jack up and down and easier to maneuver !! I bought a backing plate to use with it too. Just makes it look better than the universal mount system.

https://www.etrailer.com/Accessories...n/F500320.html
https://www.etrailer.com/Trailer-Jac...413100334.html

[Flip Flop Fisher]

Do yourself a big, BIG favor and get a Fulton F-2 duel wheel jack !!! SO much easier to jack up and down and easier to maneuver !! I bought a backing plate to use with it too. Just makes it look better than the universal mount system.

https://www.etrailer.com/Accessories...n/F500320.html
https://www.etrailer.com/Trailer-Jac...413100334.html

This is exactly what I'm going to do. Thanks for the links!

[grandbassslayer]

Fulton F-2 is by far the best jack I have ever had.

[Flip Flop Fisher]

just got a Fulton F-2 winch so this will be a matching pair. So in the picture, the jack is attached with the snap ring as well as the backing plate bolts?

[snickers1]

this is what you want

Do yourself a big, BIG favor and get a Fulton F-2 duel wheel jack !!! SO much easier to jack up and down and easier to maneuver !! I bought a backing plate to use with it too. Just makes it look better than the universal mount system.

https://www.etrailer.com/Accessories...n/F500320.html
https://www.etrailer.com/Trailer-Jac...413100334.html

[Bassman Ia.]

am looking for one with a bigger wheel so that it will roll easier

if you can’t re-use the old mount—— here is what a member did

[wmitch2]

just got a Fulton F-2 winch so this will be a matching pair. So in the picture, the jack is attached with the snap ring as well as the backing plate bolts?

No, you'll probably want to cut the old mounting plate off, or mount the new jack in front or behind it.