Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2020
    Location
    Fredericksburg, VA
    Posts
    96

    Can I use two transducers at same time on bow

    I vertical fish a lot in the winter for stripers. On my last boat I had an HDS unit on the console but mounted on a ram mount. When I went to the bow I would turn that unit around so I could see it from the bow and also be using my bow mounted HDS unit with transducer mounted on trolling motor.. i was able to see both units at same time and be looking at almost twice as much real estate.. amazing how one unit might show stripers and the other wouldn’t... now I have a boat with two HDS12 lives on it.. console unit is flush mounted.. the units are connected... can I some how split the screen up front and see the front transducer image on one side of the screen and the rear transducer image on the other side???

  2. Member
    Join Date
    Dec 2004
    Location
    Woodland, CA
    Posts
    773
    #2
    Yes you can. Set up a screen with sonar + sonar. For source select This Unit on one pane and select your console unit as source for the other pane
    2004TR-21X/2015 250 ProXS
    2B112175

  3. Member
    Join Date
    Mar 2020
    Location
    Fredericksburg, VA
    Posts
    96
    #3
    Awesome... thanks sir