what do i need to connect the bow and console .both less than a month old
what do i need to connect the bow and console .both less than a month old
Last edited by old stratos; 11-21-2020 at 06:49 AM. Reason: age
They connect via ethernet. Just run a Garmin Marine Network cable between the two units and they'll share sonar and maps.
Don’t be tempted to use a standard Ethernet cable. It won’t work!
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
If only running the two units then the garmin Ethernet cord is all you need. You want to add livescope then you will need a gms network hub.
Will they automatically share quickdraw maps with the cable? Or do I need to do something to get them to share? I created one at the console and it's not showing up at the bow. And is the 93 uhd compatible networking wise with the 93+sv?
Daryl Larson
13 Triton 18pro, 150hp Mercury Optimax Pro XS Garmin Electronics
Yes, the Plus and UHD are ethernet compatible, and QD contours do share over the network. See this link below for more info regarding network sharing compatibility.
https://support.garmin.com/en-US/?fa...0Compatibility
Garmin Pro Team
2020 Nitro Z21 Pro | Mercury 250 Pro XS |Ultrex 36v 112 MDI | Solix G2 chirp/mega SI 10 and 12 |Garmin 93sv UHD w/LiveScope| 8' PowerPole Blades