Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29
  1. Member I.P. Freely's Avatar
    Join Date
    Sep 2017
    Location
    Lake Lanier
    Posts
    3,430
    #21
    Quote Originally Posted by GMAK View Post
    I'm not too good at adding pics, but here is my brother and I heading out first day of musky tourney in October. Boat did awesome for a full weekend tourney.
    Attachment 436173
    Nice Pic!

  2. Member I.P. Freely's Avatar
    Join Date
    Sep 2017
    Location
    Lake Lanier
    Posts
    3,430
    #22
    Do y’all have a sweet spot on the trailer for loading and unloading the boat at the boat ramp? On my Skeeter it was when water was two inches above the front fender step.

  3. Member
    Join Date
    Jun 2018
    Location
    Roseville, Michigan
    Posts
    324
    #23
    Quote Originally Posted by GMAK View Post
    Perfect, thank you. I wondered about that bottom bracket, now I know what to look for, thanks
    2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
    Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
    Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
    Minn Kota Ultrex 112lb with Humminbird MEGA 360
    Dual Minn Kota 12' Talon with R&R Design
    Extended Emergency Ladder

  4. Member
    Join Date
    Jun 2018
    Location
    Roseville, Michigan
    Posts
    324
    #24
    Quote Originally Posted by I.P. Freely View Post
    I didn’t know the 212 Reata doesn’t have support shocks on the lids?
    Sadly, no... The only two lids that has them is the back one with the charger/batteries/spare prop and then the rod locker. I'd like to add them to 3 other lids, two of the front compartments and the bottom center one. The rest should be fine without. Had someone bump a lid by accident this summer and it shut on one of my wifes rod tips snapping it off, it was under warranty but still cost $50 to get a new replacement rod.
    2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
    Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
    Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
    Minn Kota Ultrex 112lb with Humminbird MEGA 360
    Dual Minn Kota 12' Talon with R&R Design
    Extended Emergency Ladder

  5. Member
    Join Date
    Jun 2018
    Location
    Roseville, Michigan
    Posts
    324
    #25
    Quote Originally Posted by I.P. Freely View Post
    Do y’all have a sweet spot on the trailer for loading and unloading the boat at the boat ramp? On my Skeeter it was when water was two inches above the front fender step.
    Sometimes it'll depend on the ramp but usually I'm backing the trailer in until the tops of the fenders are just above the water. Here in MI we can't power load so someone that can may not back in as far.
    2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
    Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
    Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
    Minn Kota Ultrex 112lb with Humminbird MEGA 360
    Dual Minn Kota 12' Talon with R&R Design
    Extended Emergency Ladder

  6. Member
    Join Date
    Jun 2013
    Location
    NW Wisconsin
    Posts
    38
    #26
    Quote Originally Posted by gary_fritz View Post
    Sometimes it'll depend on the ramp but usually I'm backing the trailer in until the tops of the fenders are just above the water. Here in MI we can't power load so someone that can may not back in as far.
    I'll second that and add, I usually back the trailer all the way in to wet the bunks, then pull forward until I see the fenders.
    2006 Ranger Reata 210 - 225 Etec

  7. Member
    Join Date
    Jan 2012
    Location
    Nixa, MO
    Posts
    3,231
    #27
    Cool boat..

  8. Member I.P. Freely's Avatar
    Join Date
    Sep 2017
    Location
    Lake Lanier
    Posts
    3,430
    #28
    Quote Originally Posted by GMAK View Post
    I'll second that and add, I usually back the trailer all the way in to wet the bunks, then pull forward until I see the fenders.
    Good to know for next time I take her out, but need to put new tires on her first, hopefully this week. Still has the original Goodyear’s on the trailer.

  9. Member I.P. Freely's Avatar
    Join Date
    Sep 2017
    Location
    Lake Lanier
    Posts
    3,430
    #29
    Quote Originally Posted by Table Rock 1 View Post
    Cool boat..
    Thanks, liking it so far.

Page 2 of 2 FirstFirst 12