-
Trailer Bow Stop
When loading my Tracker, the bow dosen't line up with the bow stop roller, usually about 2" to the side. The bunks are not adjustable and seem to be okay. What I was wondering is if I replace the roller stop with a "Y" stop this might make the bow move to center when loading... any ideas?
Last edited by Strokerace; 11-20-2020 at 02:27 PM.
-
bunks are allways adjustable,,, just depends on what size hammer you have....
Beat snot out of bunk mounts till boat moves over a bit
-
Just before the boat goes to the stop I have to turn to the right to get mine in the center of the bow chock. Maybe you can try that.
-
Thanks, I will give it a try
-
I don't think you will like the Y type stop on your Tracker, or at least I didn't on my 185. If you bump it very hard it will flip over, then it's a PITA to get flipped back over without backing the boat off.
-
Yeah.........don't want that! Thanks
-
Thats how mine was. Hated it. Also once on it, had a hard time cranking the hook all the way to the stop without the Y trying to move.
Changed to a bow roller with end bells and prefer it much better
-
Member
Make one to fit your needs.
-
This one helped me along with turning @ just before the stop. https://www.amazon.com/Shoreline-Mar...7637885&sr=8-5
Reply With Quote