Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2010
    Location
    Conroe, TX
    Posts
    6,520

    Powerpole Hose Re-Route

    I need to re-route my powerpole hydraulic hoses so I have to unhook them from the pump. Any tricks, do's or don't tips. Simple has unhooking, re-routing and screwing back on?

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,919
    #2
    put poles down about a inch from floor, unhook hoses , place hoses in a bottle /catch can, best to have someone hold with rag around end, force pole up by hand (push up) will push fluid out of hoses. Reroute hoses, rehook up, pour fluid back into pump and rebleed system as if it was new.

  3. Member
    Join Date
    Mar 2010
    Location
    Conroe, TX
    Posts
    6,520
    #3
    Thanks. I called PP and they told me something similiar. Put poles down, push up 4-6" and good to go. Unplugged from pumps and zero oil came out. Re-routed, plugged them back in and good to go.

  4. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,919
    #4
    Quote Originally Posted by barbarian View Post
    Thanks. I called PP and they told me something similiar. Put poles down, push up 4-6" and good to go. Unplugged from pumps and zero oil came out. Re-routed, plugged them back in and good to go.